The oven takes a long time to activate from standby and shows three dots on the display
Issue
When pressing the ON button of the oven on standby, it takes some seconds until the oven is ready to be used.
There are three dots shown in the oven display (as shown below).
The oven takes longer than expected to turn on
Resolution
The issue can be resolved by connecting the appliance to the WiFi network.
You can find information on how to connect your appliance to your WIFI in the user manual chapter “Wireless connection”.
After connecting the appliance to your WiFi, the issue should be resolved.
Was this article helpful?
Related Articles
- Oven displays error code with prefix F
- Oven display shows PYR
- Oven steam self - cleaning function
- The door of the oven does not close properly
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual
- Oven does not heat up
- How to connect the oven to additional smartphones and how many users can connect simultaneously?
- Symbols and functions on your Electrolux oven
- How to remove oven shelf supports for cleaning
- Oven displays error message C1 ,C2, C3, C4