Oven displays error code F602 or F603
Resolution
Issue:
- The oven displays error code F602 or F603
Applies to:
- Built-in connected oven
Resolution:
Your WiFi signal is unavailable if your oven displays either of the codes below.
DISPLAY CODE | DESCRIPTION |
F602, F603 | WiFi signal is not available |
Possible Solutions:
1. Turn the oven off and on
2. Restart your WiFi router
3. Check if other devices receive the wireless signal, i.e. your smartphone or laptop and if your internet connection by WiFi is working
4. Move your router closer to the oven
If one of these errors occurs, the rest of the oven functions will continue to work normally.
If these error messages continue to appear on the display, there may be a faulty subsystem that has been disabled.
If all steps above have been followed and your appliance is still not connecting, please click on the 'Book A Repair' link on the right-hand side of this page to arrange a service call.
Was this article helpful?
Related Articles
- Oven does not heat up
- Connected oven shows fault F215 in display
- The door of the oven does not close properly
- Oven cooling fan runs all the time
- Oven pyrolytic self - cleaning function gives poor results
- Oven displays code F102
- Oven makes noise when I use the true Fan cooking function
- Oven has visible signs of damage
- Oven steam self - cleaning function
- The oven door cannot be opened after pyrolytic cleaning
Book a repair
Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.