Oven clock flashes or time displaying 00:00 / 12:00 - Electrolux

Issue

• Oven clock flashes
• Oven clock displays "0:00" or "12:00" and flashes
• How to set the oven clock?
• The oven clock is flashing, the oven is not heating up
• Changing the oven clock from daylight saving time to winter time or vice versa

Applies to

• Ovens

Resolution

A flashing oven clock (displaying 00:00 or 12:00) indicates that the clock has not been set after the appliance was installed or there has been a power cut.

Set the time by following the instructions in the user manual (section Clock Functions). The manual can be downloaded here.

The methods for setting the time vary depending on the type of control panel.

Example oven control panels and how to set the time of the day:

Control Panel No. 1

The indicator flashes after the device is connected to the power supply, after a power cut, or when the clock is not set.

Press the + or - button to set the correct time.

After about five seconds, the flashing will stop and the current time set will be displayed.

To change the current time, press for a few seconds until the symbol starts flashing

Press the + or - button to set the correct time.

After about five seconds, the blinking will stop and the current time set will be displayed.

Control Panel No. 2

After the first connection to power (or resetting the appliance), wait until the following appears on the display: time, 12:00. 12 – flashing

Turn the temperature control knob to set the time.

- press to confirm. The display will show the set time and: min. 00 – flashing.

Turn the temperature control knob to set the minutes.

- press to confirm. The set time will appear on the display

To change the current time, press for a few seconds until the symbol starts flashing

Control Panel No. 3

After connecting the device to the power supply for the first time, wait until the display shows h and 12:00. The “12” will be flashing.

1. Press one of the buttons below to set the time.

2. Press OK

3. Press one of the buttons below to set the minutes

4. Press OK

The newly set time will appear on the display. To change the current time, press , until the clock symbol on the display starts flashing.

Control Panel No. 4

How to set: Current time

To change the current time, go to the menu and select Settings, Current Time.

Setting the clock

Press OK

Control Panel No. 5 (freestanding cooker)

Setting the time:

1. Before using the oven, the time must be set. The indicator flashes on the display after connecting the appliance to the power supply, after a power interruption, or when the clock is not set.

2. Press + or - to set the correct time.

3. After about five seconds, the flashing will stop and the current time set will be displayed.

Time change:

ATTENTION: You cannot change the current time if any function is active.

Press the clock button several times until the current time indicator starts flashing. For setting the new time, refer to the 'Setting the time' information.

Cause

• Flashing '0:00' on the clock's display may be caused by an earlier power cut in the socket to which the oven is connected.