Loosely fitted hoses
Resolution
Make sure that all hoses are securely fitted
Time: 5 min
Loosely fitted hoses can vibrate against the appliance during spinning, producing a “knocking” noise.
Step 1: Make sure that all hoses are securely fitted and attached to the back of the appliance’s housing.
Step 2: Make sure the screw for the hose clamp is not removed.
Was this article helpful?
Related Articles
- Blocked drain hose
- test root cause
- Blocked filter / Drain pump jammed or blocked
- Rinse Hold function activated
- Excessive foaming/too much detergent
- No power to the washing machine
- Fluff filter jammed
- Water supply issue (tap turned off, low pressure)
- Blockage on the waste spigot / blocked plumbing
- Incorrect drain hose height