Induction hob rear zone discolouration after boiling pan of water for pasta or rice
Applies to
- Induction Hob
Resolution
Food may boil over from time to time, ensure the hob is dry and switched off before applying any cleaning product.
It is possible with steel and aluminium pans that stains may appear on the surface of the Hob.
To remove the stains / marks
- Any discolouration of the Hob can be dealt with by cleaning the surface with Vitro Care Hob Cleaner which can be found in the WebShop.
- Apply a few drops of the Vitro Care Hob Cleaner to the surface
- Use a piece of kitchen towel and rub it over the surface of the mark
- As the mark gradually disappears it will appear as a grey mark on the kitchen towel
- Repeat as necessary
Was this article helpful?
Related Articles
- Can I put a protection mat on the induction hob?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Hob displays message F
- Hob displays error message E7
- Hob displays error message E9
- Hob displays message H
- Hob displays message L, the hob is locked
- Discoloured glass plate / ceramic glass cleaning tips
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
Related Articles
- Can I put a protection mat on the induction hob?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Hob displays message F
- Hob displays error message E7
- Hob displays error message E9
- Hob displays message H
- Hob displays message L, the hob is locked
- Discoloured glass plate / ceramic glass cleaning tips
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433