Hob displays error message E0 / E1
Issue
- Hob displays error message E0 / E1 / E011 / E012 / E013
Applies to
- integrated electric (ceramic) hob
- integrated induction hob
Resolution
1. Disconnect the appliance from power for at least 30 seconds.
Note: To restart the appliance, disconnect it from the mains and wait 30 seconds before switching it back on.
In the case of built-in appliances, it is not necessary to physically disconnect the cable - the appliance can be disconnected using the household RCD breaker.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause
- Error messages E0 / E1 / E011 / E012 / E013 indicate a fault with the electronics.
Was this article helpful?
Related Articles
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Induction hob rear zone discolouration after boiling pan of water for pasta or rice
- How to cook with your Electrolux TotalFlex induction hob
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays error message E7
- Touch Control Induction or Ceramic hob beeps and then switches off
- Only one side of the hob is operating
- How to use the frying function on your Electrolux SenseFry hob
- Hob displays message A
- The induction hob is noisy, makes a humming sound