Hob displays error message E0 / E1
Issue
- Hob displays error message E0 / E1 / E011 / E012 / E013
Applies to
- integrated electric (ceramic) hob
- integrated induction hob
Resolution
1. Disconnect the appliance from power for at least 30 seconds.
Note: To restart the appliance, disconnect it from the mains and wait 30 seconds before switching it back on.
In the case of built-in appliances, it is not necessary to physically disconnect the cable - the appliance can be disconnected using the household RCD breaker.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause
- Error messages E0 / E1 / E011 / E012 / E013 indicate a fault with the electronics.
Was this article helpful?
Related Articles
- Touch Control Induction or Ceramic hob beeps and then switches off
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- Hob displays error message E8 / E822
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays message L, the hob is locked
- Hob displays error message E7
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.