Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Ventilation on Integrated and Freestanding Fridge Freezer
- Serial number/Model number/Product number (PNC) on my fridge freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Fridge freezer shows code E09
- Water Pooling In Fridge Freezer Base / Bottom / Floor
- Temperature in the fridge-freezer is too low
- Fridge Door Will Not Close
- The light does not work in my fridge-freezer
- Water leaking from fridge / fridge freezer
- Cleaning the drain holes in the fridge