Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
Still need help? Get expert support
If the issue continues, a professional technician can help diagnose and fix the problem.
No matter if your appliance is in warranty, out of warranty, or covered by an appliance protection plan - we’ll guide you to the right service.
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Temperature in the fridge-freezer is too low
- Ice forms on the bottom of my freezer
- How to use “power cool”, and “power freeze” function?
- Why is my fridge frosting up?
- Why Is My Fridge Compressor Running Continuously?
- Cleaning the drain holes in the fridge
- How to install correctly my refrigerator / freezer / fridge freezer?
- Food freezing In fridge
- How to change the water filter in my fridge freezer? (located inside)
- Strange noises from Fridge Freezer
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Temperature in the fridge-freezer is too low
- Ice forms on the bottom of my freezer
- How to use “power cool”, and “power freeze” function?
- Why is my fridge frosting up?
- Why Is My Fridge Compressor Running Continuously?
- Cleaning the drain holes in the fridge
- How to install correctly my refrigerator / freezer / fridge freezer?
- Food freezing In fridge
- How to change the water filter in my fridge freezer? (located inside)
- Strange noises from Fridge Freezer