Fridge freezer- How to replace the thermostat (5)

Applies to

  • Fridges / Freezers

Resolution

missing alt text

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

missing alt text

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

missing alt textmissing alt text

WARNING! RISK OF INJURY

missing alt text

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

missing alt text

WARNING! RISK OF EYE INJURY

missing alt text

Wear safety glasses if you perform maintenance or repair work involving springs.

missing alt text

WARNING! RISK OF PINCHING

missing alt text

Wear safety glovesif you perform maintenance or repair work involving belts.

missing alt text

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Always empty the appliance of all the water, e.g. tumble dryer water container. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE THERMOSTAT
The thermostat is located in the top panel

1. Unscrew the top panel by removing the two screws.

missing alt textmissing alt text

2. Remove the top panel

missing alt text

3. Remove the capillary holder then detach the capillary tube from the holder

missing alt text

4. Remove the plastic tube from the capillary then straighten it

missing alt text

5. Pull out the capillary

missing alt text

6. Remove the faulty thermostat

missing alt text

7. Take out the control unit from the panel then remove the temperature regulation button

missing alt textmissing alt text

8. Exchange the faulty thermostat

missing alt text

9. Place the thermostat into the control unit then fix the control unit into the top panel

missing alt text

10. Fix back the top panel

missing alt text

11. Fix the capillary to the capillary holder. Fix the top panel with the screws

missing alt text

Was this article helpful?

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

Till webbshop

Find your User Manual

Solve problems and find instructions and other documentation for your product.

Download manual

Book a repair

Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Book a repair