Display of washer dryer is blurry
Issue
- Display of washer dryer is blurry
Applies to
- washer-dryer
Resolution
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
- If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Washer-dryer emits noises and shakes while spinning
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Clothes are too creased after washing in the washer dryer
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer does not take detergents / water remains in the softener compartment
- Fabric conditioner runs directly down into the washer-dryer’s drum
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays error message E30, C3 or emits 3 beeps