An acoustic signal is heard and the gas plate switches off by itself
Issue
- An acoustic signal is heard and the gas hob switches off by itself
- An acoustic signal sounds when the hob is deactivated
Applies to
- Electronic Gas hobs
Resolution
1. Remove the object from the sensor fields.
2. Avoid touching the sensor field for more than 10 seconds.
Cause
- You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Was this article helpful?
Related Articles
- What Cookware Works on Induction (Complete Guide)
- Induction Hob Installation Faults: Error Codes, Causes & Support
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Hob displays message A
- The ignition on my gas hob keeps sparking
- Hob, Oven or Cooker Does Not Turn On
- Hob displays error message E6 / E641
- The cooking zone does not heat
- Hob displays message L, the hob is locked
- Electrolux SaphirMatt® Hob with scratch-resistant surface - cleaning instructions
Related Articles
- What Cookware Works on Induction (Complete Guide)
- Induction Hob Installation Faults: Error Codes, Causes & Support
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Hob displays message A
- The ignition on my gas hob keeps sparking
- Hob, Oven or Cooker Does Not Turn On
- Hob displays error message E6 / E641
- The cooking zone does not heat
- Hob displays message L, the hob is locked
- Electrolux SaphirMatt® Hob with scratch-resistant surface - cleaning instructions